Filter
Top Products
81
Printing
. Configuring the Same DPOF Settings for All the Images
Procedure
MENU * Setup * DPOF Printing * All images
1. Touch “Date stamping”.
2. Touch “On” to turn date stamping on or “Off” to turn it off.
• Switching from “Off” to “On” automatically changes the number of copies value
to 1.
3. Touch “ú” or “õ” to specify the number of prints.
You can specify a value up to 99. Specify 0 if you do not want to print the image.
4. Touch “OK”.
DPOF settings are not cleared automatically after printing is complete.
The next DPOF print operation you execute will be performed using the last DPOF
settings you configured for the images. To clear DPOF settings, specify “0” for the
number of copies of all images.
Tell your print service about your DPOF settings!
If you take a memory card to a professional print service, be sure to tell them that it
includes DPOF settings for the images to be printed and the number of copies. If you
don’t, the print service may print all the images without regard to your DPOF settings,
or they may ignore your date stamp setting.
B