Filter
Top Products
59
Recording Movies
With this feature, the camera pre-records up to five seconds of whatever is happening
in front of the lens in a buffer that is continually updated. Pressing [0] (Movie) saves
the pre-recorded action (buffer contents) followed by real-time recording. Real-time
recording continues until you stop it. Prerecord Movie can be used when shooting a
standard (STD) movie, a high-definition (FHD) movie, or a high speed (HS) movie.
• When using Prerecord Movie in combination with high speed movie, the buffer will
store two seconds of pre-recording instead of the usual five.
. To set up the camera to shoot with Prerecord Movie
1. In the REC mode, press [MENU].
2. Use [4] and [6] to select the “Quality” tab.
3. Use [8] and [2] to select “» Quality” and then press [6].
4. Use [8] and [2] to select the movie mode you want to use for
shooting.
5. Press [SET].
6. Use [8] and [2] to select the bottom Control Panel option (BS) and
then press [SET] (page 33).
7. Use [8], [2], [4], and [6] to select the “Prerecord (Movie)” scene and
then press [SET].
This causes ‰ (Prerecord (Movie)) to appear on the monitor screen, indicating
that the camera is prerecording to its buffer.
Using Prerecord Movie (Prerecord (Movie))
[0] (Movie)
Movie
Real-time recording start
5-second prerecorded part (from the buffer)
* Approximately two seconds for high speed movie
[0] (Movie)
Real-time recording end