Filter
Top Products
OTHER SETTINGS
134
Configuring [ ] (REC) and [ ] (PLAY)
Buttons Power On/Off Functions
You can use the following procedures to configure the [ ]
(REC) and [ ] (PLAY) buttons so power turns and/or off
whenever they are pressed.
1.
In the REC mode or the PLAY mode, press
[MENU].
2.
Select the “Set Up” tab, select “REC/PLAY”,
and then press [̈].
3.
Use [̆] and [̄] to select the setting you
want, and then press [SET].
IMPORTANT!
• When “Power On/Off” is selected, pressing [ ]
(REC) in the REC mode or [ ] (PLAY) in the PLAY
mode turns off the camera.
• Pressing [ ] (REC) in the PLAY mode switches to
the REC mode, and pressing [ ] (PLAY) in the
REC mode switches to the PLAY mode.
NOTE
• The initial default setting is “Power On”.
Select this setting:
Power On
Power On/Off
Disable
To configure this operation:
Power turns on when [
] (REC) or
[ ] (PLAY) is pressed (but does not
turn off)
Power turns on or off when [
]
(REC) is pressed in the REC mode
or [
] (PLAY) is pressed in the
PLAY mode
Power does not turn on or off when
[
] (REC) or [ ] (PLAY) is
pressed