Filter
Top Products
63
BASIC IMAGE RECORDING
5.
Record the image.
• When you press the
shutter release button,
the self-timer lamp
flashes and the shutter
releases after the self-
timer reaches the end
of its countdown.
• You can interrupt an
ongoing self-timer
countdown by pressing
the shutter release
button while the self-
timer lamp is flashing.
NOTES
• The “2 sec” self-timer setting is best when shooting
with a slow shutter speed, because it helps to avoid
blurring of images due to hand movement.
• In the case of the Triple Self-timer, the indicator
“1sec” appears on the monitor screen between the
recording of each image, indicating an interval of
about one second between image recording. The
actual amount of time required between images
depends on the camera’s current “Size” and “Quality”
settings, as well as the type of memory being used
and whether or not the flash is being used.
Self-timer lamp
Specifying Image Size and Quality
You can specify the image size and image quality to suit
the type of image you are recording.
To specify the image size
1.
In the REC mode, press [MENU].
2.
Use [̇] and [̈] to select the “REC” tab.
3.
Use [̆] and [̄] to select “Size”, and then
press [̈].
4.
Use [̆] and [̄] to select the setting you
want, and then press [SET].
• QV-R51
2560 x 1920 :2560 x 1920 pixels
2560 x 1712(3:2) : 2560 x 1712 (3:2) pixels
2048 x 1536 :2048 x 1536 pixels
1600 x 1200 :1600 x 1200 pixels
1280 x 960 :1280 x 960 pixels
640 x 480 : 640 x 480 pixels
• QV-R41
2304 x 1712 :2304 x 1712 pixels
2240 x 1680 :2240 x 1680 pixels
2240 x 1488(3:2) : 2240 x 1488 (3:2) pixels
1600 x 1200 :1600 x 1200 pixels
1280 x 960 :1280 x 960 pixels
640 x 480 : 640 x 480 pixels