Filter
Top Products
SKU 93550
For technical questions please call 1-800-444-3353
. Page 2
Specifications
:noitcurtsnoC
scinortceleetatSdiloS
dnagulpyrettabV9htiw
srotcennocCDV21
:rewoP
edivorpotyrettabV21/V9sesU
yromemCDV21rofpukcabrewop
.smetsys
:tnemhcattA.nigulprethgiletteragiC
:stuOdaeRsthgilrotacidniDELneerG2:egu
aGeriWeriWreppoC.aG02
:esuFepytelibomotuadradnatspmA3:thgieWteN.bL½
Save This Manual
You will need the manual for the safety warnings and precautions, assembly
instructions, operating and maintenance procedures, parts list and diagram. Keep
your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep the manual and invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be
followed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1. Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Do not use electrical tools in damp or wet
locations. Don’t expose to rain. Keep work area well lit. Do not use electrically
powered tools in the presence of flammable gases or liquids.
3. Keep children away. Children must never be allowed in the work area. Do
not let them handle machines, tools, or extension cords.
4. Store idle equipment. When not in use, tools must be stored in a dry location
to prevent corrosion.
5. Use the right tool for the job. Do not attempt to force a small tool or attachment
to do the work of a larger industrial tool. There are certain applications for
which this tool was designed. It will do the job better and more safely at the
rate for which it was intended. Do not modify this tool and do not use this tool
for a purpose for which it was not intended.
6. Dress properly. Do not wear loose clothing or jewelry as they can be caught
in moving parts. Protective, electrically nonconductive clothes and nonskid
footwear are recommended when working. Wear restrictive hair covering to
contain long hair.
7. Use eye and ear protection. Always wear ANSI-approved impact safety
goggles when working near vehicle motors or batteries.