Chicago Electric 93550 Digital Photo Frame User Manual


 
SKU 93550
For technical questions please call 1-800-444-3353
. Page 5
NOTE: Some parts are listed and shown for illustration purposes only and are not
available individually as replacement parts.
Maintenance
1. This item must be kept clean and dry. Protect it from water and moisture to
prevent damage to the electrical components.
2. If it is to be stored for a long time, remove the 9V battery before storage to
prevent damage from possible battery leakage.
Troubleshooting
Green LED’s do not light when connected to 12V battery or 9V battery
installed. Possible causes: Battery has no charge, or faulty connection.
Solution: Check the charge of the battery and recheck the battery
connection and polarity.
Green LED’s do not light even though battery is charged and properly
connected. Possible Causes: Fuse is blown or device is damaged. Solution:
Test and/or replace 3 Amp fuse. Only replace fuse with same kind and
amperage fuse
Single Green LED does not glow after device is connected to cigarette
lighter outlet in step 4, page 4. Possible cause: Cigarette lighter outlet is
not active or not in good condition. Solution: Try moving ignition key to
“accessory” position and repeat steps 3-5 on page 4. If this still doesn’t
work, inspect the condition of the cigarette lighter outlet. Try the cigarette
lighter. With the vehicle battery disconnected, clean the outlet. (NOTE:
Disconnecting the battery may erase the vehicle memory.) If damaged
or dirty, the cigarette lighter outlet may need to be replaced by a qualified
technician.
Cigarette Lighter Plug
3 Amp Fuse
Battery Compartment
9V Battery Plug
Battery Compartment Cover