Filter
Top Products
2-5
Cisco Video Surveillance 7030 IP Camera Installation Guide
OL-28692-01
Chapter 2 Camera Installation
Installing the IP Camera with a Vandal Resistant Enclosure
Step 5 Perform the following steps to install and connect an RJ45 Ethernet cable.
Note We recommended using 24AWG (0.51 mm) gauge cable.
a. Drill a hole on the rubber seal plug and insert an Ethernet cable (without a connector) through the
opening.
b. Strip about 1/2 inch (12 mm) of the sheath from the Ethernet cable.
c. Use an RJ45 crimping tool to attach the Ethernet wires to a connector. When done, connect the cable
to the camera’s Ethernet RJ45 socket.
o
O
g
B
b
G
br
BR
1
2
3
4
5
6
7
8
o: white/orange stripe
O: orange solid
g: white/green stripe
B: blue solid
b: white/blue stripe
G: green solid
br: white/brown stripe
BR: brown solid