Filter
Top Products
Flexible Camera Series — Appendix
19
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Flexible Camera Series — Appendix
18
Standard(s) to which Conformity is declared:
89/336/EEC
“Electromagnetic Compatibility (EMC) Directive”:
EN 55022: 1998 (Emissions) Specification for limits and methods of
measurement of radio interference characteristics
of information technology equipment.
EN 61000-3-2:1995/A1/A2:1998 Part 3: Limits - Section 2: Limits for harmonic
current emissions.
EN 61000-3-3:1995 Section 3: Limitation of voltage fluctuations and
flicker in low voltage supply systems for equip-
ment with rated current up to and including 16 A.
EN 55024: 1998 (Immunity) Information technology equipment - Immunity
characteristics - Limits and methods of
measurement.
EN 61000-4-2: 1995/A1:1998 Electrostatic Discharge
EN 61000-4-3: 1996/A1:1998 Radiated RF Immunity
EN 61000-4-4: 1995 Electrical Fast Transients
EN 61000-4-5: 1995 Lighting Surge
EN 61000-4-6: 1996 Conducted RF Immunity
EN 61000-4-8: 1993 Radiated Magnetic Field Immunity
EN 61000-4-11: 1994 Voltage Dips and Voltage Interruptions
73/23/EEC “Low Voltage Directive (LVD)”:
EN 60950: 1992 Safety of Information Technology Equipment,
Including A1, A2, A3, A4 and A11 Electrical
Business Equipment.
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Compliance
FCC Part 15 Compliance
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC rules.These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual,may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference,in which
case the user will be required to correct the interference at his/her own expense.
Changes or modifications not expressly approved by ClearOne Communications Inc. could void the
user's authority to operate the equipment.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two con-
ditions: (1) This device may not cause harmful interference,and (2) This device must accept any
interference received, including interference that may cause undesired operation.
Safety Information
Attention: Users should not attempt to make such connections themselves,but should con-
tact the appropriate electrical inspection authority, or electrician,as appropriate.
European Compliance
This equipment has been approved in accordance with Council Directive 1999/5/EC “Radio
Equipment and Telecommunications Equipment.”
Conformity of the equipment with the guidelines below is attested by the CE mark.
EC Declaration of Conformity
Application of Council Directive(s): 1999/5/EC Radio equipment and
Telecommunications Terminal
Equipment (R&TTE) Directive
Manufacturer Name: ClearOne Communications
Manufacturer Address: 1825 West Research Way
Salt Lake City, Utah 84119 U.S.A.
Model No.: Flexible Camera Series (FlexCam,
StudentCam,TeachCam and IDCam)
Manufacturer
Signature
Roger J.Midgley
Full Name
Project Manager
Position
Legal Represent
ative in Europe
Signature
Martin Offwood
Full Name
Managing Director EMEA North
Position
!