ClearOne comm Flexible Camera Digital Camera User Manual


 
Flexible Camera Series — Appendix
13
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Flexible Camera Series — Troubleshooting
12
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Specifications
Image Pick-up Device
1/4" CCD (6.35 mm)
TV System
NTSC, PAL
Total Pixels
IDCam, StudentCam,TeachCam
NTSC and PAL:410 K
Total Pixels
FlexCam
NTSC: 266 K, PAL:315 K
Number of Effective Pixels
IDCam, StudentCam,TeachCam
NTSC: 768(H) x 492(V)
PAL:752(H) x 512(V)
Number of Effective Pixels
FlexCam
NTSC: 512(H) x 492(V)
PAL:512(H) x 582
Number of Scanned Lines
NTSC: 525 lines
PAL:625 lines
Frames per Second
NTSC: 30 fps
PAL:25 fps
Resolution
IDCam, StudentCam,TeachCam
Horizontal
NTSC, PAL:Minimum 480 TVL (center area)
Vertical
NTSC, PAL:Minimum 480 TVL (center area),
Resolution
FlexCam
Horizontal
NTSC, PAL:Minimum 330 TVL (center area)
Vertical
NTSC, PAL:Minimum 330 TVL (center area),
S/N Ratio
6 dB: Condition: AGC off, weight on
Minimum Illumination
IDCam, StudentCam,TeachCam
1.5 lux at F2.0
Minimum Illumination
FlexCam
3 lux at F2.0
White Balance
Auto
Iris
Electronic
Gain Control
Auto
Sync. System
Internal only
Power Supply
12 VDC
Operating Temperature
14° F to 122° F (-10° C to 50° C)
Storage Temperature
-4° F to 140° F (-20° C to 60° C)
Indicator
Power On/Off LED
Audio
Integrated condenser microphone with
preamplifier for line-level output
Connectors
1 S-video output
1 Line-level (audio) output
1 Power input
Part Numbers
FlexCam 910-171-110
IDCam 910-171-125
StudentCam 910-171-120
TeachCam 910-171-150
Troubleshooting Appendix
Problem Suggestion
There is no video on TV
monitor when connected to
a VCR.
Ensure that the camera, TV and VCR are plugged
into power supplies and turned on.
Ensure the camera is properly connected to the
VCR. The yellow plug on the camera should
connect to the video in jack on the VCR.
Make sure the TV is on the correct channel for
video (channel 3 or 4). Consult your TV user
manual.
TV does not have an S-video
input.
Use the S-video to composite adapter to convert
the S-video signal to a composite signal for your
TV or VCR.
How do you connect the
camera to a computer?
Use an S-video to USB adapter (recommended)
or install a video card in your computer (not
supported).