Filter
Top Products
-2-
Installing The Batteries
1. Open the battery box.
2. Load the batteries correctly: when you load the batteries, please
place both batteries according to the pole directions inscribed on the
battery box.
3. Close the battery box cover.
Note
: When you use the USB cable to connect the camera to a
computer, is unnecessary to use the batteries because the camera uses
the power provided by the computer through the USB interface.
Warning
1. Don’t open the battery box unless necessary. The interruption of
power may cause you to lose the photos in the camera.
2. If you don’t use the camera for a long time, please take out the
batteries to avoid accidental discharging or corrosion of the terminals.
3. Please don’t throw any battery into a fire. It may explode.
4. Please download photos to your computer promptly to make sure
you don’t lose any of them.
The energy saving mode is automatically activated
If the camera is not used for 30 seconds, the camera will automatically
enter the energy saving mode.