Filter
Top Products
27
5.2.6. Function Programming
<< Special function
Press OPEN or Joystick Left or Right to enter
1. PTZ Tour (Pattern)
<< Tour programming
Press OPEN or Joystick Left or Right to enter
1. Number ( 1 ~~ 3 ) << PTZ tour number
Joystick Left or Right to select
2. Name _ _ _ _ _ _ _ _ << Edit PTZ name
Press OPEN or Joystick Left or Right to enter
3. Program a Tour <<Enter Tour programming
Press OPEN or Joystick Left or Right to enter
4. Run a Tour <<Run (pattern)
Press OPEN or Joystick Left or Right to enter
5. Delete a Tour <<Delete PTZ tour.
Press OPEN or Joystick Left or Right to enter
6. Name Display ON/OFF <<PTZ tour name display On/Off
Joystick Left or Right to select
IRIS CLOSE to Exit
2. Program Vector Scan
<< Program vector scan.
Press OPEN or Joystick Left or Right to enter
1. Number ( 1 ~~ 6 ) <<Vector scan number
Joystick Left or Right to select
2. Program a Vector scan <<Vector scan programming
Press OPEN or Joystick Left or Right to enter
_ _ _ _ _ _ _ _
0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N
O P Q R S T U V W X Y Z _
IRIS CLOSE When Done
IRIS OPEN to Begin
IRIS CLOSE to Exit
Call out
Are you sure to do this?
IRIS OPEN to Confirm
IRIS CLOSE to Cancel
<< Joystick left or right when programming to
select preshot and press OPEN to confirm.
Joystick left or right to select (0~~9 or A~~Z).
Press OPEN to confirm selection.
Press CLOSE to exit or return to previous
level
menu when
programming is done.
<<Press OPEN to confirm and start programming.
<<Press CLOSE to exit the programming and return to upper stage menu.
<< Reminder: are you sure to do this.Press OPEN to confirm.
Press CLOSE to exit and return to upper stage menu.
Name Num V Dwell
1 _ _ _ _
2 _ _ _ _
3 _ _ _ _
16
IRIS CLOSE When Done
<<Joystick arbitrarily to move the
cursor, and stop the cursor at place
of programming. Press OPEN to
enter the selection.