Filter
Top Products
Troubleshooting B-1
Troubleshooting
If you have a technical problem with this product, you may wish to consult our self-help tool
“Knowledgebase” for online troubleshooting and solutions. Go to www.creative.com and select your
region.
Problems Using
Creative
WebCam NX
Pro
An application reports that the video driver is already in use, or that the camera cannot be found.
Do the following:
❑ The camera is not properly connected. To resolve this problem, ensure that the camera’s USB
connector is inserted, and that the USB connector is enabled in the BIOS. Refer to your computer’s
documentation for information on the BIOS.
❑ Reinstall the video capture drivers and restart your computer.
The camera’s Power LED does not light up, or in
Windows 98/98 SE, Me and 2000, the computer
restarts for no apparent reason.
You may have USB devices drawing too much
power from your computer. This can happen
especially when connecting USB devices to a
passive or self-powered USB hub. In Windows
XP, a dialog box similar to Figure B-1 appears.
Do the following:
❑ Connect the camera directly to your computer’s
USB port.
❑ Use a USB hub with an external power supply.
Figure B-1: USB Hub Power Exceeded dialog box