Creative Labs 02VF016000000 Digital Camera User Manual


 
3-1 Using Creative PC-CAM 930 Slim as a Digital Camera
Using Creative PC-CAM 930 Slim as a Digital Camera
To use Creative PC-CAM 930 Slim as a portable digital camera, simply disconnect it
from the computer. Use your camera’s default settings in Capture mode to take
photos. For finer control, adjusting exposure and white balance settings, see
"Configuring Your Camera" on page 3-4 for more information.
Note: Remember to insert two fresh 1.5 V AAA alkaline batteries into the camera’s
battery compartment.
Turning on you r
Camera
To turn on your camera: press and hold down the Power button on the camera
until the LED turns red.
Taking a Photo
1. Make sure that your camera is not connected to your computer.
2. Press and hold the Power button to turn on your camera.
You are in Record mode.
For standard pictures, make sure that the Standard / Macro mode switch is
moved toward .
3. Compose your picture and press the Shutter button halfway.
A yellow box appears in the center of the LCD.
4. Fully press the shutter button and release it.
Your camera beeps when you take a picture.
While composing
your picture, use
the Function
buttons to zoom
in and out.
To take close-up
pictures, move
the Standard /
Macro focus
switch to . The
Macro LED lights
up.
PC-CAM 930 Slim.book Page 1 Thursday, May 19, 2005 5:27 PM