Filter
Top Products
Using Creative PC-CAM 930 Slim as a Digital Camera 3-2
Previewing a
Photo
1. Press and hold the Mode button.
The mode selection menu appears.
2. Use the Function buttons to select the Playback mode icon.
3. Press the Flash/Set button.
4. Use the Function buttons to locate your picture on the LCD screen.
5. To exit Play mode, press and hold the Mode button.
Selecting a
Flash mode
In Capture mode , press the Flash/Set button to choose a flash mode:
• Auto flash — the flash is used automatically when required
• No flash — the flash is disabled
Recording a
Video
1. Make sure that your camera is not connected to your computer.
2. Press and hold the Power button to turn on your camera.
3. Press and hold the Mode button.
The mode selection menu appears.
4. Use the Function buttons to select the Movie mode icon.
5. Press the Flash/Set button
6. Compose your picture and press the Shutter button to begin recording
The elapsed time, in seconds, is shown at the upper right corner of the LCD.
7. Press the Shutter button again to stop recording.
Replaying a Recording 1. Press and hold the Mode button.
The mode selection menu appears.
2. Use the Function buttons to select the Playback mode icon.
3. Press the Flash/Set button.
PC-CAM 930 Slim.book Page 2 Thursday, May 19, 2005 5:27 PM