Filter
Top Products
5
1. Switch the epsilon 2.1 on by holding down the Power On/Off switch for a second.
2. Turn the mode selection switch so that the is lined up with red spot next to the power On/Off button.
3. Press the (Mode) button on the camera and then the 4 way controller right until the “setting” mode is
displayed.
4. Use the 4 way controller up and down to cycle through the options.
5. Press the (Set) button to enter that option.
6. Use the 4 way controller to change the option.
7. Press the (set) button to save the option that you have changed.
8. To exit the mode settings simply press the (mode) button at any time.
4 way controller Exposure White balance Settings Format
Exposure
Use this option to set the camera’s exposure for Manual picture taking only.
White Balance
Use this option to adjust the light balance of the camera in Manual mode only. Select the appropriate light source from
the list. The options are:
Auto
Daylight
Shade
Tungsten
Flourescent.
Format
To clear the entire contents of the SD card or internal memory select “yes” and click on the set button to confirm.
Setting up the
Camera