Filter
Top Products
8
Switch on your epsilon camera by holding down the power button for a second.
Turn the Mode selection switch to the Automatic or Manual setting for picture taking.
You can either use the viewfinder or display screen to focus on the picture you want to take.
When you are ready press down the shutter button hard and release.
The image will now be processed, when the display appears again you can take the next shot.
Note: If you have used the flash the camera will take a short while longer to recharge the flash.
Taking pictures
Macro Mode
If you want to take photo’s of close up ob-
jects slide the Macro switch upwards.
This will focus in on close objects, if this is
not enabled anything closer than one meter
will appear blurred.
Slide up
Macro switch
Power Switch
Shutter button
Mode selection set to “Auto”