Filter
Top Products
Connecting the Camera to PC
Relax, we’ve also made connecting to your pc easy. Just follow these simple instructions
and get ready to get creative.
To transfer (download) the images data from the camera to your PC, connect the camera to
your PC with the supplied USB cable.
1 Insert the smaller terminal of the USB cable into the camera's USB port.
2 Plug the other end of the USB cable into the USB port of your computer.
3 Perform downloads to your computer by referring to the section on “Downloading
images” later in this manual.
4 Operate the camera as web camera by referring to the Digital Dream Mail help within the
program.
Dream tip: Don’t forget that you must install the bundled software into your computer
before you can transfer your images to your pc. If you haven’t installed it yet just follow the
instructions in the section on “Utility Software Installation” of this manual.