Filter
Top Products
PICTURE 6-7
Next under Region click the Select button to
set up the area of the camera display that you
want to be sensitive to motion.
You will then see the camera’s view overlaid
with a grid. The green box is the current loca-
tion of the cursor. The red area is the sensi-
tive area and the clear area is not sensitive
to motion. Click the Fn button on the remote
control to adjust the sensitivity of your mouse
as you move the cursor. After you have finished
the setup click the Enter button on the remote
control to exit. Next set your sensitivity level
from 1 to 6 (6 being the most sensitive), then
click the Save button on the Detect screen to
save the setting.
PART 7 - PLAYING BACK FILES
PICTURE 7-1
The Search and Playback window
can be accessed through the Shortcut
menu. You can view the playback from
any camera that was activate during the
recording session.
Number Function Number Function Number Function
1 Playback
Window
8 Reverse 15 Backup
2 File List 9 Fast Play 16 Search
3 File Information 10 Previous
Frame
17 Next Channel
4 Playback
Progress Bar
11 Next Frame 18 Next File
5 Stop 12 Volume 19 Video Clip
6 Slow Play 13 Previous File 20 Repeat Playback
7 Play 14 Previous
Channel
21 Full Screen
08-19-2010 00: 00: 00
All 1 ALL2 3 4
CH
11:37:22 M
11:48:00 R
11:54:00 A
12:10:00 M
13:00:00 R
14:00:00 R
15:00:00 R
16:00:00 R
17:00:00 R
StartTime Type
Start Time
08-19-10 13:20:00
End Time
08-19-10 13:26:00
Size(KB) 52736
1p 2p 3p 4p
1
4 6
5
13
14
15
16
3
2
7 9 11
8 10 12
17
18
19 21
20
The playback screen can be set to display the recordings from one camera or as many channels as
you have.
SEARCH
To begin a search for an event:
STEP 1. Enter the date to be searched.
You can also click on the clock icon
to open the Calendar. Highlighted
dates have recorded files.
PICTURE 7-2
PICTURE 7-3
PICTURE 7-4
PICTURE 7-5
STEP 2. Enter the start time (if known) or
skip this field to search the entire day.
Select the type of event; All, Alarm,
Motion Detection (MD) or both Alarm
and Motion Detection.
STEP 3. Select which channels you wish
to view. Each of the four slots is a
pull-down which allows you to select
a specific channel. You can leave
these empty to view 1-3 channels.
You can also choose to view four
channels at a time or all eight channels
simultaneously.
STEP 4. Click on the Search icon and any
records fitting your criteria will be listed
in the column to the right of the screen.
Up to 128 files can be displayed and
multiple tabs (pages) may be displayed
in the search results depending on the
number of cameras you have as well
as how you configured your playback
display. In the event that a camera is set
to manually record, the events will be
broken up by hour.
All 1
CH
All
Alarm
MD
Alarm/MD
CH
13
14
15
16
1 2 3 4
11:37:22 M
11:48:00 R
11:54:00 A
12:10:00 M
13:00:00 R
14:00:00 R
15:00:00 R
16:00:00 R
17:00:00 R
Start Time
08-19-10 15:00:00
End Time
08-19-10 15:59:00
Size(KB) 52736