D-Link DCS-3010 Security Camera User Manual


  Open as PDF
of 72
 
43D-Link DCS-3010 User Manual
Conguration
HTTPS
This section explains how to enable authentication and encrypted
communication over SSL (Secure Socket Layer). It helps protect streaming
data transmission over the Internet on higher security level.
Enable HTTPS
Select this item to enable HTTPS communication, then select a connection
option: "HTTP & HTTPS" or "HTTPS only". Note that you have to create and
install a certicate rst in the second column before clicking the Save button.
Create and Install Certicate Method
Before using HTTPS for communication with the camera, a certicate must be
created rst.
There are three ways to create and install a certicate:
Create Self-signed Certicate Automatically
1. Select this option.
2. In the rst column, select Enable HTTPS secure connection, then select
a connection option: “HTTP & HTTPS” or “HTTPS only”.
3. Click Save to generate a certicate.
4. The Certicate Information will automatically be displayed in the third
column. You can click Property to view detailed information about the
certicate.
5. Click Live Video to return to the main page. Change the address from
“http://” to “https://“ in the address bar and press Enter. Some Security
Alert dialogs will pop up. Click OK or Yes to enable HTTPS.
Create Self-signed Certicate Manually
1. Click Create to open the Create Certicate page, then click Save to
generate the certicate.
2. The Certicate Information will automatically be displayed in the third
column as shown below. You can click Property to see detailed
information about the certicate.
 previous next