D-Link DCS-7010L Digital Camera User Manual


  Open as PDF
of 82
 
67D-Link DCS-7010L User Manual
Section 4: Conguration
HereyoucanconguretheICRandIRsettings.AnIR(Infrared)Cut-Removable(ICR)ltercanbedisengagedforincreasedsensitivityinlowlight
environments.
Automatic:
Day Mode:
Night Mode:
Schedule Mode:
IR Light Control:
O:
On:
Sync:
Schedule:
The Day/Night mode is set automatically. Generally, the
camera uses Day mode and switches to Night mode
when needed.
Day mode enables the IR Cut Filter.
Night mode disables the IR Cut Filter.
Set up the Day/Night mode using a schedule. The camera
will enter Day mode at the starting time and return to
Night mode at the ending time.
ThecameracanenableordisabletheIR(infrared)light
according to your preferences. This setting provides
additional controls depending on your specic application.
The IR light will always be o.
The IR light will always be on.
The IR light will turn on when the ICR sensor is on.
The IR light will turn on or o according to the schedule
that you specify below.
ICR and IR
 previous next