Filter
Top Products
16D-Link DCS-7513 User Manual
Section 2: Assembly and Installation
Orienting the Camera
Step 1
Using the Allen Wrench provided, loosen the adjusting bolts on both sides of the
camera shoe. This will allow you to adjust the vertical orientation of the camera.
Step 2
Firmly tighten the adjustment bolts on both sides of the camera shoe.
Step 3
Using the Allen Wrench provided, loosen the adjusting bolts on both sides of
the wire-in bracket. This will allow you to adjust the horizontal orientation of
the camera.
Step 4
Firmly tighten the adjustment bolts on both sides of the wire-in bracket.
The DCS-7513 can be adjusted to ensure an optimal viewing position when mounted to a wall by following the steps outlined.
1
3