Filter
Top Products
22D-Link DCS-7513 User Manual
Section 2: Assembly and Installation
Step 1
Insert the Installation CD-ROM into your computer’s optical drive to start the
autorun program.
The CD-ROM will open the Camera Installation Wizard. The Setup Wizard will
guide you through the installation process through to conguring your camera.
Note:
If the autorun program does not automatically start on your computer, go to
Windows, click Start > Run. In the Run command box type D:\DCS7513.exe,
where D: represents your CD-ROM drive.
Step 2
Accept the End User Licence Agreement and follow the on screen prompts to
install the Camera Installation Wizard.
Step 3
Select your camera from the list, then click Wizard. If you have multiple cameras,
you can identify them by the MAC ID printed on the label on the back of your
camera.
Software Installation