Filter
Top Products
17D-Link DCS-7513 User Manual
Section 2: Assembly and Installation
Step 1
Position the Alignment Sticker in the desired location making sure the Camera
and Wire-in-Bracket have sufficient space. Use the dimension diagrams in
"Dimensions" on page 71 for additional reference.
Step 2
Use a 6mm drill bit to make required holes approximately 30mm deep.
Step 3
Remove the Alignment Sticker.
Step 4
Insert wall anchors and ax the mounting plate using the screws provided.
1
4
Deploying the Camera
Note: Before deploying the camera to a xed location, it is recommended that you take a photo from the desired location to
ensure an adequate eld-of-view.