Filter
Top Products
VIDEO Mode (For NTSC, lower resolution)
Layer 1 Layer 2 Layer 3 Function
Brightness
0-46 (for PAL)
0-40 ( for NTSC)
Brightness adjustment
Gamma
Photo/Text Select Photo/Text Mode.
Image
Normal/Gray Select Normal/Gray Mode.
Freeze
On/Off
Use Freeze to retain the image on
the screen.
Display
Exit
Exit this menu.
Lamp
On/Off Turn On/Off lamp
Advance
Full Range On/off
Night view On /off
Exit
Switch Full range on/off and night
view on/off
Language
English / / /Exit
Select a preferred language on the
menu.
Factory
Reset
Enter / Exit
Reset all the values to the factory
default.
Setting
Exit
Exit this menu.
Exit menu.
Camera as Switch
The DVI Adapter connects the DVI output to an input for a computer (VGA).
When this input is used, the “SOURCE” button or menu command will switch
the output between the “CAMERA IMAGE” and the “COMPUTER” image
(VGA) on the DVI adapter.
15
When camera is “OFF” the computer VGA signal from the “DVI Port” adapter
will pass through the camera to the “VGA Out” port. Thus the camera can be in
a path to a projector and will let the signal pass through. If the camera is turned
on the VGA pass through remains until the “Source” button is pressed. The
camera image then becomes the output.
Note: The camera must be plugged in to have this pass through feature.