3.4.
Flip: Flip the Image of Digital Presenter. (Only flips the output image to the
projector. Will not flip image on PC monitor.)
3.5.
Freeze: Freeze the image of Digital Presenter.
3.6. Photo: Adjust the gamma. (The Photo and Text functions are not available
on the computer monitor)
3.7. Lamp on: Turn on the lamp
Lamp off: Turn off the lamp
3.8. AF: Focus automatically. ( only for Digital Presenter series)
3.9. Source: Switch the Signal Source output (VGA or Presenter).
3.10. Capture: Capture the image from Digital Presenter. Then it can be
saved by the PC directly.
3.11. Power: Turn on/off the power.
3.12. Lens Mode: No function.
3.13. Image Mode: Select the image type
Normal, Gray, Invert
Slid , Microscope. ( Only for special products)
18