Filter
Top Products
9
3-3 Power On
● Gently slide lens cover open as illustrated. A long
beep sounds, and the camera turns on.
● To turn off the camera, gently slide the lens cover so
the lens is hidden.
● Use the lens cover located on the front of the camera
to turn the camera on and off. After the camera is on,
the red LED will blink, and then the last image recorded
will appear on the LCD monitor.
※Power Saving: If no operations are performed for 60
seconds, the power is turned off to prevent battery
drain. Please power on the camera again to resume
shooting.
※Unless "Reset Default" has been selected before the
camera is turned off, the following features will be
automatically saved in the user’s selected
configuration:
1. Resolution 2. Image Quality 3. Language
4. White balance 5. EV Value 6. Frequency
7. PC MODE
3-4 Shutter Button
This camera is designed for 2-step shutter function. A
"[ ]" mark appears in the center of the LCD display when
the Shutter button is pressed and held half way down.
The camera will beep after the Shutter button is pressed
down fully; then release the Shutter button to take a
picture.