DXG Technology DXG-228 Digital Camera User Manual


 
21
left hand side of the camera is toggled to Macro Mode.
If the battery low icon appears on the LCD Monitor,
please change the batteries immediately to maintain
operation normality.
The countdown for the Self-timer is 10 seconds.
There are 4 basic resolutions offered by the camera:
2048x1536, 1600x1200, 1280x960, and
800x600.
Please monitor the distance between the camera and
the object when using the Flash. The internal built-in
Flash of this camera is effective within about 1.5
meters.
If the Macro Mode is selected, the flash turns off
automatically to avoid overexposure.
If "Memory Full" or “Card Full” warning messages
appear, it means the memory card is full. Please
remove the memory card and insert a new one or
delete unwanted photos to continue shooting.
6-3 Image/Movie Play Mode
In Play Mode, users can review recorded still pictures
and movies. To review the pictures:
1. Turn on the camera.
2. Press Mode Button
and use the Function
keys
to move to .
3. Press the
Button to get into Setup Mode
screen, the LCD monitor will display the menu.
4. Use””and”” of the Function key
to go to
“previous” and “next” images.
5. Use the
Button to Delete One or Delete All to
enter the function menu.
6. Use “” of the Function keys
to move between
selections; Use “” to toggle between selections.
7. Use
Button to enter the menu.
8. Use exit to exit the function menu, and return to Play
Mode menu.
DPOF function can only be operated when the
memory card is inserted.
If there is no image stored in the internal memory or
memory card, a “No picture” message will pop up on
the LCD Monitor in the Play Mode.
6-4 Movie Mode
You can use Movie Mode to record movie pictures (not
including audio). To record the movie pictures, perform
the following:
1. Turn on the camera.
2. Press Mode Button
and use Function keys
to move to .
3. Press the
Button to get into the Setup Mode