Filter
Top Products
28
Here are the descriptions of every setup item:
Item
Description
LAN
Select this option to assign an IP address to LAN port (or
obtain an address from DHCP server automatically).
Available options are:
DHCP IPv4: Obtain an IPv4 IP address from DHCP server
on LAN automatically.
DHCP IPv4 / IPv6: Obtain both IPv4 and IPv6 address from
DHCP server on LAN automatically.
Static IPv4 / IPv6: Assign an IPv4 / IPv6 address to IP
camera manually. If you don’t have a DHCP server on your
local area network, you must use this option to specify an
IP address.
IP Address(IPv4): Input IPv4 IP address*
IP Address(IPv6): Input IPv6 IP address*
Prefix Length: Input IPv6 IP address’ prefix length
(0-128)
Subnet Mask: Input subnet mask
Gateway: Input gateway address
Primary DNS: Input DNS server’s IP address
Secondary DNS: Input backup DNS server’s IP address,
you can leave this field blank.
* You can leave this field blank, if you only wish to use
IPv4 or IPv6 IP address.
Enable UPnP Discovery: Check this b ox to enable other
devices on network to discover the presence of this IP
camera by UPnP. It’s recommended to enable this
function.
Enable UPnP Port Mapping: When UPnP is enabled, check
this box to enable UPnP’s port mapping.
PPPoE
Select this option to use PPPoE to connect to network. You