Filter
Top Products
9
OPERATION
Make sure that your digital frame is correctly connected using the AC
adapter, as shown on the previous page, before turning the frame on.
Press the Power On/Off button to turn the
unit on.
T
MTM
1
1
1
Insert an SD/MMC card, up to 2 GB, into
the SD/MMC Card slot
1, making sure to
insert the SD/MMC card correctly as indi-
cated by the arrow.
AND/OR
Insert a flash drive into the USB port 2.
The unit will read the SD/MMC card
and/or flash drive contents and show the
pictures in the display.
If both a SD/MMC card and a flash drive
are inserted, this unit will display the con-
tents of the the flash drive first and then
the SD/MMC card.
2
1
2
Press the MENU button to access the
main menu.
TMTM
1
1
3
Picture Management: Use the Up 1
and/or Down 2 button to select Picture
Management and then press the ENTER
button
3 to confirm.
Use the Up
1 and/or Down 2 button to
select the desired picture and then press
the ENTER button
3 to confirm. An “X” will
appear next to the picture name. Press
the ENTER button
3 again to confirm.
Then press the MENU button
4 to exit
the menus.
TMTM
4
1
3
2
4