OPERATION (Continued)
Press the MENU button to access the
main menu again.
5
Equipment Select: Use the Up 1 and/or
Down
2 button to select Equipment Select
and then press the ENTER button
3
to confirm.
Use the Up
1 and/or Down 2 button to
select between USB and SD/MMC and
then press the ENTER button
3 to confirm.
Then press the MENU button
4 to exit
the menus.
NOTE: You can also use the USB and/or
Card button on the remote, or the
USB/Card button on the main unit to select
between the two options.
6
Press the MENU button to access the
main menu again.
7
System Setup, Picture Display Mode:
Use the Up 1 and/or Down 2 button to
select System Setup and then press the
ENTER button
3 to confirm.
Use the Up
1 and/or Down 2 button to
select Picture Display Mode and then
press the ENTER button
3 to confirm.
Use the Up
1 and/or Down 2 button to
select between 16:9 (wide) and 4:3 (stan-
dard) and then press the ENTER button
3
to confirm.
Then press the MENU button
4 to exit
the menus.
NOTE: You can also use the 4:3/16:9 but-
ton on the remote to select between the
two options.
8
10
