Filter
Top Products
13
TROUBLESHOOTING GUIDE
PROBLEM
POSSIBLE SOLUTION
No power.
Make sure that the AC adapter is connected
correctly as shown on page 8.
The unit is automatically in Standby mode.
Disconnect the AC adapter and reconnect as
shown on page 8.
No picture.
Ensure that the power is on and that a flash
drive and/or SD/MMC card are inserted.
The controls on the main unit and/or the
remote do not work.
Press the Power On/Off button to turn the unit
off and then back on. If that does not work, with
the unit off, disconnect the AC adapter and
reconnect as shown on page 8.
Picture is distorted.
The picture may be distorted while using the
Prev/Next buttons. This is normal and not a
malfunction of the unit.
The remote control does not work.
Make sure that a fresh battery is inserted as
shown on page 7. Also, refer to the effective
distance of the remote control transmitter and
the notes regarding remote operation on that
page.
CARE AND MAINTENANCE
1. Clean this unit with a damp (never wet) cloth. Solvent or
detergent should never be used.
2. Avoid operating this unit under direct sunlight or in hot,
humid or dusty places.
3. Keep this unit away from heating appliances.