Filter
Top Products
5. Wire Connection
Connect the power supply cable (AC24V/DC12V), video output and alarm
output to the proper connectors shown as Figure 7.
The V. Phase adjustment screw is located on the termination board.
The vertical phase may require adjustment to synchronize the vertical
phase of the camera with other camera in the system when it is to be used
in the line-lock sync mode. Make the adjustment when the vertical phase
of the camera does not match with other cameras.
Termination Board
Micro Switch for Alarm trigger
Video
A
larm COM
V. Phase Adjustment VR
GND
A
larm NO
A
larm NC
Power In
DC12V
(+) or AC24V
Power In
AC12V
(-) or AC24V
Figure 7
7