Filter
Top Products
3. Mounting the base.
Attach the base to the wall or ceiling, fix the base by the 4 setscrews
attached in the accessory pack. The dome is weighted 1.7kg, please make
sure if the mounting is strengthened enough to support it, if not,
please reinforce the mounting according to the environment.
Note: The diameter of the screw hole isψ4.7mm.
Caution: To prevent moisture leaking into the housing, apply an
appropriate gasket or sealant around the conduit connection.
Side conduit entry
Figure 4
Mounting Setscrew
Mounting Setscrew
Back conduit entry
Conduit plug setscrew
Mounting Setscrew
Mounting Setscrew
Back conduit entry (PF1/2)
Conduit plug
The camera comes with a conduit plug
p
re-installed in the PF 1/2 conduit entry
on the side. The screw can be removed
and installed in the back conduit entry.
Loosen the conduit plug setscrew (as
shown in Figure 5) before removing the
conduit plug.
Side conduit entry (PF1/2)
Figure 5
5