EverFocus EHD320 Security Camera User Manual


 
Dip Switch Functions
LEVEL
ALC
Vide o
GND
ON
OFF
LL
AGC
BLC
FL
Vide o
GND
ON
OFF
LL
AGC
C BL
FL
ES
Board Lens Vari-Focal Lens
LL (Line-Lock) Off/On
To select the sync mode between Internal Sync.(LL off) and Line-Lock
(LL on).
Set the line-lock off, the camera will synchronize to the internal time base.
Set the line-lock on, the camera’s vertical synchronization can be driven by
the AC signal in the power lines.
Note: Line-Lock sync mode operation is possible only when used with an
AC power source; it’s not possible with a DC power source.
The default setting is ON.
AGC (Automatic Gain Control) Off/On
AGC ON: The sensitivity increases automatically when light is low.
AGC OFF: A-low-noise picture is obtained under a low light condition.
The default setting is ON.
9