Filter
Top Products
ENVS800 / ENVS1600 / ENVS3200 Installation Manual
47 of 115
5.5.1.5 Camera occlusion event
Sensitivity Sensitivity of detection, moving slider to right increases
sensitivity, moving to left decreases sensitivity.
Interval Filter function for detection. If slider is moved to right, a
longer period of camera occlusion is needed to trigger
alarm.
Ignore Lighting change With activated checkbox the event will not trigger, if a global
light change (turn light on / off) appears in the camera
picture.
Start / Stop Simulation With START SIMULATION you can test, if current settings
are correct.
Below the video window appears "Event detected". End the
simulation mode with "STOP SIMULATION".