Filter
Top Products
ENVS800 / ENVS1600 / ENVS3200 Installation Manual
61 of 115
5.7 E-Map
The NVR series provides an e-map function, which allows to show location of installed IP -
Devices on maps or other graphics.
In GUARD mode the map can popup automatically in case of an event and show the event
location including preview of the event camera.
For setup of e-map go to > START > E-MAP.
Select "Edit mode".
Click on "ADD MAP"
Enter the map or image file. Accepted file formats are BMP, JPEG, TIFF, PNG, GIF.
Assign a map name and confirm with OK.
The map will appear in the middle window and the map name is listed in the device list
on left side.
List of installed IP
devices
Map - area
Preview window for
selected camera
Additional info for
map.