EverFocus ENVS800 Security Camera User Manual


 
ENVS800 / ENVS1600 / ENVS3200 Installation Manual
64 of 115
Define Object Size Define the estimated object size by drawing in the video
window.
If necessary, the object size has to be adjusted again after
running simulation (in case of no safe detection).
Options 1 Way Counting: Application will count movements from
REGION 1 to REGION 2 only.
2 Way Counting: Application counts movements in both
directions
Sensitivity: Adjust the detection sensitivity
depending on the scenery. Use the
simulation mode for test. This setting is
also related to OBJECT SIZE setting.
Runtime
Options for live - display:
Show Counting
Result
The number of counted movements is shown as overlay
in the live view of the camera.
Show Object Bounding
Box
Counted objects are marked in live view of the camera.
Reset every.... Time interval for resetting the counting result display in