Filter
Top Products
11
1.5 Camera Component Description
1) Reset: To load the factory default configuration press the button, which is inside this
hole, for 3 seconds. Please gently insert a thin, non-metallic device into the hole
to operate the reset button.
2) Control Key: For setting Lens & OSD menu. Press the mini-joystick and hold for 5 seconds to
switch between Lens & Menu setting. When the camera is in Lens mode, turn
the mini-joystick up () or down () to zoom in/ zoom out. Turn the mini-
joystick left () or right () to adjust focus.
3) Lens/Menu: Lens LED will turn green when you select the Lens adjustment mode. Menu
LED will turn red when you select the Menu setting mode.
4) Video/GND: for aim and focus access to video at the camera, use the Video Test Cable
supplied to connect to a hand held test monitor (EN220 or similar).
Sunshield
Use a coin or screwdriver
to remove the cover
Controls are inside the cover
Speedy-mount Ring
1
2
4
3
Green
: Lens mode
Red
: Menu mode