Filter
Top Products
34
3.3.7.5 D-ZOOM
Setup for digital zoom.
OFF Disable the D-ZOOM function
ON D-Zoom: Select digital zoom from X1.0 up to X32. Note that zoom levels
above X4 may lead to excessive pixellation.
Setup of the position of the magnified image in view (0 is the center of the
image):
Pan: Select digital pan from -100 to 100.
Tilt: Select digital tilt from -100 to 100.
Press “RET” to saves all settings in D-ZOOM menu and returns to the previous menu.
Press “END” to save all the setting menus and exit.
3.3.7.6 GAMMA
This menu allows adjustment of gamma correction for ideal linearity of image brightness and
contrast in the range 0.05 to 1.0.
3.3.7.7 NEG. IMAGE
Allows user to create a negative of the original image. A negative image is a tonal inversion of a
positive image, in which light areas appear dark and vice versa. A negative color image is
additionally color reversed, with red areas appearing cyan, greens appearing magenta and blues
appearing yellow.
3.3.7.8 RETURN
Return: Press “RET” to save all settings in D-EFFECT menu and return to the previous menu.
Press “END” to save all the menu settings and exit.
3.3.7.9 MOTION
This camera enables you to observe movements of objects in 4 different areas on the screen,
and the message “MOTION DETECTED” appears on the screen when movement is detected.
The camera detects an object’s movement by sensing changes in the pixels displayed.
OFF
Disables the MOTION function.
ON
AREA SELECT Please select the area you would like to detect from the 4 areas in AREA
SELECT mode
AREA DISPLAY Select “ON” to use the motion area selected in sensitivity. Select “OFF” to
disable this function.
LEFT/RIGHT Set the coordinate of the horizontal axis 5~66.
WIDTH Set the size of horizontal area 0~93.
TOP/BOTTOM Set the coordinate of the vertical axis 1~60.
HEIGHT Set the size of vertical area 0~60.
SENSITIVITY Set the sensitivity level for the motion trigger by selecting from 0~40. When