Filter
Top Products
35
the sensitivity value is high, motion detection sensitivity increases to sense
very small movements and vice versa.
MOTION VIEW Select “ON” to display motion detection pixels in the live view.
RETURN Press “RET” to save all settings in MOTION menu and return to the
previous menu. Press “END” to save all the menu settings and exit.
3.3.7.10 PRIVACY
This mode masks areas you do not want to display on the screen or record.
OFF Disable the PRIVACY function.
ON
AREA SELECT Please select the area you would like to hide from the 8 areas in AREA
SELECT mode.
AREA DISPLAY Select “ON” to use the area selected in the AREA SELECT. Select “OFF”
to disable this function.
LEFT/RIGHT Set the coordinate of the horizontal axis 6~98.
WIDTH Set the size of horizontal area 0~93.
TOP/BOTTOM Set the coordinate of the vertical axis 0~60.
HEIGHT Set the size of vertical area 0~61.
COLOR Set area color. It is selectable from 0 to 15.
RETURN Press “RET” to save all settings in PRIVACY menu and return to the
previous menu. Press “END” to save all the menu settings and exit.
3.3.7.11 SYNC
There are two SYNCHRONIZATION modes INTERNAL and LINE-LOCK. In LINE-LOCK mode,
the video signal is synchronized to the frequency of the incoming AC power. The Line-Lock
synchronization can only be used when the supply power is 24VAC 60Hz (NTSC models) or
50Hz (PAL models).
INT Internal synchronization
L/L Line-lock synchronization (only for 24 VAC)
3.3.7.12 LANGUAGE
Select OSD language. EZ650 camera supports multiple languages including English, Japanese,
Traditional Chinese and Simplified Chinese.
3.3.7.13 RETURN
Press “RET” to save all settings in the SPECIAL menu and return to the previous menu.
Press “END” to save all the menu settings and exit.
3.3.8 ADJUST
Adjust sharpness, Blue and Red level in this section.