FujiFilm 16404935 Digital Camera User Manual


 
38
Choosing an Exposure Mode
Shutter-Priority AE (S)
Shutter-Priority AE (S)
To adjust shutter speed manually while letting the camera select aper-
ture for optimal exposure, set aperture to A and use the shutter speed
dial. S will appear in the display.
R At settings other than 180X, shutter speed can also be adjusted in increments
of 
/
EV by rotating the command dial or (except in advanced  lter mode;
P 63) by pressing the selector left or right. Shutter speed can be adjusted
even while the shutter button is pressed halfway.
Q If the correct exposure can not be achieved at the selected shutter speed,
aperture will be displayed in red when the shutter button is pressed halfway.
Adjust shutter speed until the correct exposure is achieved.
Aperture mode switch
S
200
2000
F5.6
1
1
1
2
2
3
3
0
0
Q If the subject is outside the metering range of the camera, the aperture display will show “– – –”.
Lenses with No Aperture Ring
Lenses with No Aperture Ring
If the lens is not equipped with an aperture ring, shutter speed can only be adjusted by pressing the selector left
or right. Shutter speed can not be adjusted in advanced  lter mode (P 63).