Filter
Top Products
58
Bracketing
Bracketing
Automatically vary settings over a series of pictures.
1
Press the DRIVE button to display drive options and press the selector up or down
to highlight one of the following:
Option
Option
Description
Description
AE BKT
AE BKT
Press the selector left or right to highlight a bracketing amount. Each time the
shutter button is pressed, the camera will take three shots at up to about 6 fps:
one using the metered value for exposure, the second overexposed by the select-
ed amount, and the third underexposed by the same amount (regardless of the
amount selected, exposure will not exceed the limits of the exposure metering
system).
ISO BKT
ISO BKT
Press the selector left or right to highlight a bracketing amount. Each time the
shutter is released, the camera will take a picture at the current sensitivity (P 45)
and process it to create two additional copies, one with sensitivity raised and the
other with sensitivity lowered by the selected amount (regardless of the amount
selected, sensitivity will not exceed ISO 6400 or fall below ISO 200).
FILM SIMULATION
FILM SIMULATION
BKT
BKT
Each time the shutter is released, the camera takes one shot and processes it to
create copies with the lm simulation settings selected for X FILM SIMULATION
BKT in the shooting menu (P 75).
DYNAMIC RANGE
DYNAMIC RANGE
BKT
BKT
Each time the shutter button is pressed, the camera takes three shots with di er-
ent dynamic ranges (P 75): 100% for the rst, 200% for the second, and 400% for
the third. The shots are taken at rates of up to about 6 fps. While dynamic range
bracketing is in e ect, sensitivity will be restricted to a minimum of ISO 800; the
sensitivity previously in e ect is restored when bracketing ends.
AE BKT
±
1
±
2
/
3
±
1
/
3
Press MENU/OK to select the highlighted option.
2
Take photographs.