Filter
Top Products
8
1
2
3
4
How to use the MENU/SET button and four-direction button
1 Selecting the menu and mode
2 Selecting the menu
☞
Make the menu you want to change blink/light.
3 Selecting the mode
☞
The current mode blinks.
4 Setting the mode
☞
The set mode is displayed.
∗
The LCD backlight is green (mode set) when the power is turned on and when a mode has
been set (goes out after 10 seconds).
The LCD backlight is orange (mode selection) while the mode is being selected (goes out after
10 seconds of no operation).
∗
When the LCD is difficult to read at night etc, press any of the , , or buttons to turn the
backlight (green) on.