Filter
Top Products
110
U SET-UP
Use this function to specify whether frame numbers are
assigned consecutively from previous numbers or begin
again.
CHECK
MEMO
• Setting this function to CONT. makes file management
easier as it makes sure that file names are not
duplicated when images are downloaded to a PC.
• When the camera settings are RESET (➝p.108),
the frame number setting (CONT. or RENEW) is
changed to CONT. and the frame number itself does
not return to 0001.
• In CONT. setting, images are stored beginning from the
highest file number on the current Memory Card when
the Memory Card already contains image files with file
numbers higher than the highest file number on the last
Memory Card.
• The displayed frame number may differ for images
photographed on other cameras.
FRAME NO.
*
Formatted Memory Card or internal memory used for
both A and B.
CONT. : Pictures are stored beginning from the highest
file number stored on the last Memory Card or
internal memory used.
RENEW: Pictures are stored on each Memory Card
beginning with a file number 0001.
Each image will be numbered consecutively
from the last number used. So when recorded
images in the Memory Card are erased, the
number of the erased frame will not be used
again.
AA
BB
<CONT.> <RENEW>
100 - 0001
100 - 0001
File number
Frame number
Directory number
The last 4 digits of the 7-digit number in the top right
corner of the LCD monitor are the file numbers, while
the first 3 digits show the directory number.
How to use the SET-UP menu (➝p.106)