Filter
Top Products
81
Settings
4
80
SET-UP
●
!
A ruined image can not be saved from the preview function.
●
!
Preview zoom works in the same way as the playback zoom
(➡P.28).
01 02
●
!
If the “BACK (DISP)” button is pressed, recording of images
stops.
01 02
Use this setting to specify whether images are
displayed after shooting.
ON: Images are displayed for 2 seconds
and then automatically recorded.
OFF: Images are recorded without being
displayed.
PREVIEW: The results of your shot are shown as a
preview (for image checking) and you
can then choose whether or not to
record the image.
h To record the image:
Press the “MENU/OK” button.
h To discard the image:
Press the “BACK (DISP)” button.
The preview zoom can also be used.
●
!
In Long-period continuous shooting the images do not
appear.
●
!
In top 4-frame continuous shooting, and final 4-frame
continuous shooting, the images appear for a set time before
being recorded even when “OFF” is selected.
●
!
The color tones in images displayed when “ON” is selected
may differ slightly from those in the images actually recorded.
IMAGE DISPLAY
Preview zoom
When the “PREVIEW” setting is selected, this
function lets you enlarge images for detailed
checking.
1Press the Zoom button to zoom in or out.
2Press “a”, “b”, “d” or “c” to display another
part of the image.
Continuous shooting preview
(
image checking
)
When the “PREVIEW” setting is selected, images
shot can be checked in the top 4-frame continuous
shooting, final 4-frame continuous shooting or auto
bracketing modes.
However, you cannot use the preview zoom.
1Press “d” or “c” to check the images.
2Press the “MENU/OK” button to record all the
images.
When this function is enabled and the camera is
not used for 60 seconds, the screen temporarily
turns off (sleep mode) and the viewfinder lamp
blinks at 1-second intervals to save power. If the
camera remains unused for 2 or 5 minutes, it is
turned off. Use this function when you want to get
the maximum possible running time from your
batteries.
●
!
The Power save setting is disabled during automatic
playback and when a USB connection is being used.
POWER SAVE SETTING
◆
To restore power to the camera
◆
When the Power save function (2 or 5 minutes
setting) has shut the camera down:
Press the “POWER” button.
FORMAT
Initialize (format) the xD-Picture Card for use with
the camera.
Because initializing the xD-Picture Card erases all
the frames (files), including protected frames (files).
Back up important frames (files) onto your PC or
another media.
1Press “d” or “c” to select “OK”.
2Pressing the “MENU/OK” button erases all the
frames (files) and initializes the xD-Picture
Card.
●
!
If “7”, “w”, “0” or
“
-” appears, see P.112 for information
before formatting the xD-Picture Card.
01 02
When the camera is in sleep mode, pressing the
shutter button down halfway wakes the camera up.
●
!
Pressing any other button as well as the shutter button wakes
the camera up.
The Sleep function does not operate in SET-UP or Playback mode, but the camera will turn off if it
is left unused for a set time (2 or 5 minutes).