FujiFilm FinePix E550 Digital Camera User Manual


 
85
Software Installation
5
5.1 INSTALLATION ON A Windows PC
5
Software
Installation
Pre-installation checklist
To run this software, you must have the hardware and software described below. Check your
system before you begin the installation.
1 Models with one of the above operating systems pre-installed.
2 When you install the software, log in using a system administrator account (e.g. “Administrator”).
3 Required to use the FinePix Internet Service. The software can still be installed even if you do not have an Internet
connection.
Operating System
1
CPU
Windows 98 (including the Second Edition)
Windows Millennium Edition (Windows Me)
Windows 2000 Professional
2
Windows XP Home Edition
2
Windows XP Professional
2
200 MHz Pentium or better recommended (800 MHz Pentium
III
or better
recommended for Windows XP)
RAM
64 MB minimum (128 MB minimum for Windows XP), Minimum 256 MB
when RAW FILE CONVERTER LE is used
Hard disk space
Amount required for installation: 450 MB minimum
Amount required for operation: 600 MB minimum
(When using ImageMixer VCD2 for FinePix: 2 GB or better)
Minimum 1 GB when RAW FILE CONVERTER LE is used
Display
800 × 600 pixels or better, 16-bit color or better
(When using ImageMixer VCD2 for FinePix: 1024 × 768 or better)
Internet connection
3
i To use FinePix Internet Service or mail attachment function:
An Internet connection and e-mail transmission software
i Connection speed: 56 k or better recommended
Notes
i Connect the camera directly to the PC using the USB cable (included). The software may not operate
correctly when you use an extension cable or connect the camera via a USB hub.
i When your PC has more than one USB port, the camera can be connected to either port.
i Push the USB connector fully into the socket to ensure that it is securely connected. The software
may not operate correctly if the connection is faulty.
i Additional USB interface board is not guaranteed.
i Windows 95 and Windows NT cannot be used.
i Operation is not guaranteed on home-built PCs or on PCs running updated operating system
software.
i When you reinstall or remove FinePixViewer, the Internet menu and your user ID and password for
the FinePix Internet Service are deleted from your PC. Click the [Register now] button, enter your
registered user ID and password and download the menu again.
i To use Video Chat, a PC running Windows XP Professional (Service Pack 1) or Windows XP Home
Edition (Service Pack 1) is required with a sound card, a connected microphone and speakers, and
Windows Messenger 5.0 or later installed. When using a router, check that the router is compatible
with Windows Messenger.
84
SET-UP
CCD-RAW
Setting CCD-RAW to ON disables the signal processing functions (reconstituting the data received
from the CCD as an image) performed on the camera. Consequently, this task must be performed
on the PC.
Use the bundled RAW FILE CONVERTER LE software to perform the processing on a PC.
Conversion using RAW FILE CONVERTER LE also provides a simple way to create TIFF-format
images.
To rebuild images, FinePixViewer (on the bundled CD-ROM) must be installed on your PC.
The functions listed below cannot be used in CCD-RAW mode.
During shooting
Digital zoom, Continuous shooting and FinePix Photo mode (image quality, sensitivity (ISO
800) and FinePix COLOR) are unavailable.
During playback
Playback
image quality
is fixed at “2” (1600 × 1200).
Playback can be zoomed up to 11.9×, but trimmed images cannot be saved.