FujiFilm FinePix E550 Digital Camera User Manual


 
93
Viewing Images
6
92
6.1 CAMERA CONNECTION
6
Viewing
Images
Do not connect the AC power adapter to charge the
AA-size Ni-MH (nickel-metal hydride) batteries. Use
the battery charger (included) (P.10) to charge
the AA-size Ni-MH batteries.
Check that the camera is off. Plug the AC power
adapter connector into the “DC IN 3V” socket and
then plug the AC power adapter into the power
outlet.
!
The socket-outlet shall be installed near the equipment and
shall be easily accessible.
!
The shape of the plug and socket-outlet depends on the
country of use.
AC-3V
DC IN 3V
socket
Always use the FUJIFILM “AC Power Adapter AC-3V” (sold separately) or the “AC Power Adapter
AC-3VW” bundled with the PictureCradle CP-FXA10 (sold separately) (P.105).
Use the AC power adapter to avoid losing power at inconvenient times, such as when downloading
photographed images to your PC. You can take pictures and play back images without worrying
about depleting the batteries.
!
See P.110 for notes on using the AC power adapter.
!
When using the optional cradle, the AC power adapter bundled with the cradle must be used. The use of AC power
adapters other than the bundled product will cause faults.
!
Only connect or disconnect the AC power adapter when the camera is off.
Connecting or disconnecting the AC power adapter while the camera is turned on temporarily interrupts the power supply
to the camera, so that images or movies being shot are not recorded. Failing to turn the camera off first can also result in
damage to the xD-Picture Card or malfunctions during PC connection.
6.1.1 Using the AC Power adapter
(
sold separately
)
Turn off the camera and TV. Plug the A/V cable
(included) into the “A/V OUT” (Audio/Visual output)
socket.
Plug the other end of the cable into the video input
socket on the TV.
!
When there is a power outlet available, connect the AC
Power Adapter AC-3V.
!
Images are only sent to the TV in Playback mode.
!
When connecting the A/V cable to TV, the LCD monitor is
turned off.
!
Refer to the instructions provided with your TV for more
information on video input for your TV.
!
The image quality for movie playback is lower than for still
images.
6.1.2 Connecting to a TV
A/V OUT
(Audio / Visual output)
socket
DC IN 3V socket
1
2
Video (yellow)
Audio (white)
To terminals
5.3 INSTALLATION ON A Mac OS X
10
The “FinePixViewer installation completed” message dialog appears. Then click exit button and
close it.
11
Launch “Image Capture” from the “Applications” folder.
12
Change the Image Capture settings.
Select “Preferenes...” from the “Image Capture”
menu.
14
Select “FPVBridge” from “FinePixViewer” folder in
the “Applications” folder and click the [Open] button.
15
Select “Quit Image Capture” menu in the “Image Capture” menu.
8
The “FinePixInstallOSX” window appears.
Click the [Install] button to install FinePixViewer and RAW FILE CONVERTER LE.
9
The ImageMixer VCD2 installer automatically starts up and a window showing the installation
progress appears. (Installation may take several minutes.)
13
Select “Other...” from “When a camera is connected, open”.