Filter
Top Products
Indicator
OPEN
Indicator
OPEN
12 13
1
1Slide the battery cover out to open it.
2Load the batteries correctly as shown.
●
!
Do not apply excessive force to the battery cover.
LOADING THE BATTERIES AND xD-Picture Card
01
02
Do not open the battery cover while the camera
is still switched on. This could damage the xD-
Picture Card or corrupt the image files on the
xD-Picture Card.
◆
When you want to replace the battery
◆
●
!
Take care not to drop the battery when opening
and closing the battery cover.
03
04
3Aline the arrows on the camera and the xD-
Picture Card, and firmly push the card fully
into the xD-Picture Card slot.
4Close the battery cover.
●
!
If you open the battery cover while the camera is
switched on, the camera automatically switches off
to protect the data on the xD-Picture Card .
●
!
The xD-Picture Card will not slide fully into the slot if
it is inserted facing the wrong way. Be careful not to
apply undue force to the xD-Picture Card .
●
!
To protect the xD-Picture Card , always store it in the
special anti-static case.
◆
When you want to replace
the xD-Picture Card
◆
When you push the xD-Picture Card into the slot
and then slowly remove your finger, the lock is
released and the xD-Picture Card is pushed out.
You can then pull the xD-Picture Card the rest of
the way out.
●
!
Take care not to remove your finger too quickly after the lock
is released, as the card may spring completely out of the slot.
Check that the camera is switched off, open
the battery cover and then remove the
batteries.
OPEN