Filter
Top Products
First Steps
13
Basic Setup
A language-selection dialog is displayed the first time the camera is turned on. Set up the camera as
described below (for information on resetting the clock or changing languages, see page 72).
1
Choose a language.
SET
SET
NO
NO
START
START
MENU
MENU
/ LANG.
/ LANG.
1.1 Press the selector up, down,
left, or right to highlight a
language.
1.2 Press MENU/OK.
2
Set the date and time.
2011
2010
2008
2007
YY.MM.DD 1. 1 12
:
00
AM
DATE / TIME NOT SET
2009
SET NO
2.1 Press the selector left or right
to highlight the year, month,
day, hour, or minute and press
up or down to change. To change the
order in which the year, month, and day
are displayed, highlight the date format
and press the selector up or down.
2.2 Press MENU/OK.
A Note
Go to the setup menu if you try to set the language and date again (pg. 72).
B
Tip: The Camera Clock
If the battery is removed for an extended period, the camera clock will be reset when the camera is turned on.
If the battery has been left in the camera for about 2 hours or more, the battery can be removed for about 24
hours without resetting the clock.