Filter
Top Products
37
1 Replace the battery with a new one.
2 Press the POWER button.
3 Remove the film, and load an unexposed roll.
●
Be sure not to move the rewind button while film
is loaded in the camera.
1 Pull the end of the film out to the FILM TIP mark
and correctly load the film.
2 A picture can not be taken by pressing the shut-
ter release button in that condition. Open the cam-
era back a little and close it again.
●
After straightening the film cassette, close the
camera back.
11
10
15
29
15
15
17
1 “
” symbol is blinking.
2 Power switch is not on.
3 Are “
” and “ ” blinking on the dis-
play?
●
Did you operate the rewind button in
the middle of the film?
1 Did you pull the end of the film out to
the FILM TIP mark when loading the
film?
2 Did you insert the battery after load-
ing the film?
●
Is the film cassette in positioned prop-
erly?
The shutter release
won’t trip.
The film rewound during
photographing.
After loading the film and
closing the back cover,
the exposure counter
does not advance.
The camera back will
not close.
TROUBLE SHOOTING
During operation
Problems Possible Causes Solutions Page